Optical Fiber Cable Connector Devices Indoor Outdoor FTTH Odn Solution Armoured Fiber Optic Cable

• Customization: Available
• Application: Telecommunication
• Material Shape: Round Wire
• Model NO.: optic fiber
• Sheath Material: LSZH/PE Sheath/Flame Retardant Sheath/Anti-Rodent
• Insulating Material: PE
• Conductor Type: Stranded
• Certification: ISO9001
• Wire Core Material: Steel
• Transport Package: Wooden Drum
• Specification: 2-288
• Trademark: SUNMECH/OEM
• Origin: China
• HS Code: 8544700000
• Production Capacity: 10000000 Cores Km/Year

Product Description

Description:
Fiber optic cable structure is a single mode or multi-mode fiber into the loose sleeve, cable core center is a non-metal reinforced piece, loose sleeve around its twisting and synthesis of compact and round cable core, cable core gap filled to prevent water compounds extruded by a layer of polyethylene inner sheath, aramid yarn armor extruded into polyethylene outer sheath cable.

Features:
Excellent mechanical and environmental performance
Good waterproof performance
Gel-filled Loose tube protect the fiber well
All dielectric material good for application in thunder area
Light weight and small diameter reducing the load caused by towers and backprops
Large span lengths and the largest span is over 1000m

Standars:
The cable offered by US are designed, manufactured and tested according to the standards as follows:

ITU-T G.652	Characteristics of a single-mode optical fibre
IEC 60794-1-1	Optical fibre cables-part 1-1: Generic specification-General
IEC 60794-1-2	Optical fibre cables-part 1-2: Generic specification-Basic optical cable test procedure
IEC 60794-3	Optical fibre cables-part 3: Sectional specification-Outdoor cables

Cable Cross-section:

Cable Identification:
The color code of fibers and loose tube will be identification in accordance with the following color sequence,other sequence also is available.Can be customized according to customer needs.

Technical Specification

Remark:1.D is the diameter of the cable;
               2.The above parameters are typical value;
               3.The cable spec can be designed according to customer's requirement.
Optical Fiber Characteristics:
The performance of cabled optical fiber (ITU-T Rec. G.652D)

G.652.D single mode fiber
Characteristics	Conditions	Units	Specified values
Optical properties
Attenuation	1310nm	dB/km	≤0.35
	1383nm	dB/km	≤0.34
	1550nm	dB/km	≤0.21
	1625nm	dB/km	≤0.24
Attenuation vs. Wavelength Max. α  difference  @1310nm	1285~1330nm	dB/km	≤0.04
@1550nm	1525~1575nm	dB/km	≤0.03
Dispersion  Coefficient	1285nm~1340nm	ps/(nm.km)	-3.5~3.5
	1550nm	ps/(nm.km)	≤18
	1625nm	ps/(nm.km)	≤22
Zero dispersion wavelength		nm	1300nm~1324nm
Zero dispersion slope		ps/(nm^2.km)	≤0.092
Typical Value		ps/(nm^2.km)	0.086
Polarization mode dispersion coefficient PMD
Single fiber maximum value		ps/	≤0.20
Fiber link value(M=20,Q=0.01%)		ps/	≤0.10
Typical value		ps/	0.04
Cable cut-off wavelength λcc		nm	≤1260
Mode field diameter MFD	1310nm	μm	9.2±0.4
	1550nm	μm	10.4±0.5
Point Discontinuities	1310nm	dB	≤0.05
	1550nm	dB	≤0.05
Geometric characteristics
Cladding diameter		μm	124.5±1.0
Cladding non-circularity		%	≤1.0
Coating diameter		μm	242±7
Coating-cladding concentricity error		μm	≤12.0
Curl (radius)		M	≥4
Delivery length		km/reel	2.1~50.4
Environmental characteristics(1310nm,1550nm,1625nm)
Temperature Dependence Induced Attenuation	-60ºC ~+85ºC	dB/km	≤0.05
Temperature-Humidity Cycling Induced Attenuation	-10°C to +85°C, 98% RH	dB/km	≤0.05
Water Immersion Dependence Induced Attenuation	23°C,for 30 days	dB/km	≤0.05
Damp Heat Dependence Induced Attenuation	85°C and 85% RH,for 30 days	dB/km	≤0.05
Dry Heat Aging	85ºC	dB/km	≤0.05
Mechanical properties
Proof test		GPa	≥0.69(100kpsi)
Macro-bend Induced Attenuation
1 turnФ32mm	1550nm	dB	≤0.05
100 turns Ф60mm	1625nm	dB	≤0.05
Coating Strip Force	Typical average force	N	1.5
	Peak force	N	1.0~8.9
Dynamic fatigue parameter			≥20